6706 Fuel Injector Rail Assembly Remover & GM245 Fuel Injector Seals Tools Perfectly Fits for GM Engines

GM245 Fuel Injector Seals Tools

When you want to change the seal ring on the top of the injector, You may find that it is very difficult to put the seal ring into the groove of the injector.

Our Fuel Injector Seals Tools can help you to change the seal ring easily.

Premium Material:

Made from quality steel, precision cutting to make each part is manufactured to specifications using.

High precision and hardness ensure reliable long-term service.

Fits for General Motors 2.0L & 3.6L engines with Hitachi fuel injectors [2010-2017];

Fits for GM 2.0L, 2.5L, 5.3L & 6.2L engines with Bosch, Continental Delphi fuel injectors [2012-2017];

Fits for Subaru 2.0L/2.4L turbo engines [2014-2019].

Fits for Holden Colorado 7 2016

Package Includes:

1 × Seal Sizer

1 × Installer Pusher

2 × Long Seal Installer Guide

2 × Short Seal Installer Guide

• Used for replacing the fuel injector Teflon O Ring Seals.
• Installs the dual seals onto the end of the injector to ensure proper injector installation.
• Comparable to #EN-4924, EN-51105, 18683AA000, 18683A.

Easily remove and replace the old seals for reusing an injector:

Step 1. Cut off the old Teflon seal near the tip of the injector;

Step 2. Place the pilot cone on the tip of the injector;

Step 3. Push the new seal on the cone;

Step 4. Use the installer pusher to push the seal into the groove of the injector;

Step 5. Use the seal sizer tool to compress the Teflon seal to the correct size;

Step 6. Finish! (EN-49245 must be used to install the seals correctly and to ensure they are sized correctly for leak-free operation.)

6706 Injector Rail Assembly Remover Tool

Used for the Hitachi SIDI system on 2010 LF1 3.6L V6 and LAF 2.0L ECOTEC has two seals on each injector, and these seals are installed with very tight tolerances.

Once the engine has been run, injector and rail removal is very difficult, and the assembly must be removed as straight as possible to prevent the chance of damaging an injector bore in the cylinder head, or to the mount assembly.

Each mount assembly contains an isolator, and cannot have any force applied to the mount for removal.

Universal Fit for most of vehicles.

Fits for 2007 - 2014 General Motors direct injection vehicles.

Fits for Cadillac Saturn Pontiac Chevrolet direct injection engines,

Fits for 2007 - 2014 4.3L 3.6L 3.0L GDI V6, 2.5L 2.4L 2.0L GDI I-4.

Note: If you are working on a 5.3L or 6.2L you will need 2 sets.

• Similar to EN-49248 and compatible with OTC 6706.
• This Tool installs in place of the mounting bolts, and reaches under the injector rail near each mount location.
• The hand wheels on this tool at each mount location are tightened evenly to un-seat all injectors evenly, preventing damage to the injectors, cylinder head and rail mount assemblies.
• Helps properly remove the direct injection fuel rail without damage.

Usage Guide:

Step 1.

Remove the fuel injection fuel rail noise shield.

Disconnect the electrical harness from the fuel rail harness connection.

Disconnect all 4-fuel injector electrical connections.

Remove the fuel rail assembly retaining bolts.

Note: Use care to avoid contact with the fuel rail harness during special tool installation and fuel rail removal.

Step 2.

Install EN-49248studs (1) into the 2 center fuel rail assembly retaining bolt locations.

Tighten the studs to 22-Y(16-lb-ft).

Install EN-49248 remover-(2) onto each stud, and engage the hooks to the fuel rail.

Install the nuts-(3) retaining there mover onto the studs and tighten until snug.

Step 3.

Note: EN-49248 will assist in the proper removal of the fuel rail assembly. Ensure that the following conditions are met:

Turn the handles simultaneously in order to pull the fuel rail straight out along the fuel injector axis.

DO NOT twist when pulling out on the fuel rail and injector assembly.

Using EN-49248 remover, remove the fuel rail assembly-(1).

Features & details

Features

• 【GM245 Fuel Injector Seals Tools】Fits for GM 2.0L & 3.6L engines with Hitachi fuel injectors [2010-2017] and 2.0L, 2.5L, 5.3L & 6.2L engines with Bosch, Fits for Continental Delphi fuel injectors [2012-2017] and compatible with Subaru [2014-2019] 2.0L/2.4L turbo engines.
• 【6706 Injector Rail Assembly Remover】Fits for 2007 - 2014 General Motors Cadillac Saturn Pontiac Chevrolet direct injection engines. Application for 4.3L 3.6L 3.0L GDI V6, 2.5L 2.4L 2.0L GDI I-4. (Note: If you are working on a 5.3L or 6.2L you will need a quantity of 2 sets.)
• 【High Performance】❶ GM245 Fuel Injector Seals Tool comparable to EN-49245, EN-51105 and 18683AA000, used for replacing the fuel injector teflon seals without damage or leakage. ❷ 6706 Injector Rail Assembly Remover Tool replaces for EN-49248, used to evenly loosen the seat rings of all injectors and properly remove the direct injection fuel rail without damaging the injectors, cylinder head and rail mount assemblies.
• 【Superior Material】Made of highest quality Steel for great strength, prevent corrosion and rust, impact resistance, sturdy and durable. High precision and hardness ensure reliable long-term service.
• 【100% Satisfaction Guarantee】If you''re not satisfied with this tools Set, simply return it for a full refund in 30 days. While you have any questions about our products, please feel free to contact us and we will provide the best service. Always buy confidently in Bonbo!

Product information

Additional Information

• ASIN: B08YN9V8LJ
• Customer Reviews: 4.1 out of 5 stars 11Reviews
• Best Sellers Rank: #190,665 in Automotive (See Top 100 in Automotive) #319 in Automotive Replacement Fuel Injectors
• Date First Available: March 11, 2021

Have a question?

Find answers in product info, Q&As, reviews

Have a question?

Videos

1. For related products

   

   0:39

   GM245 Fuel Injector Seals Tools Replaces for 18683AA000

   Truck Repair US

2. For related products

   

   0:38

   EN-49248 Injector Rail Assembly Remover Tool 6706

   Bird's wings

3. For related products

   

   0:53

   Volkswagen Audi Fuel Injector Puller Tool

   DPTOOL US

Share this video with friends

Related posts

1. allsun + Follow Features a waterproof detection coil, giving you the freedom to lower the coil up to 20cm underwater, so you can go beneath the surface and easily uncover your treasure! Great gift for a responsible teenager!

   See more
2. Autory + Follow Fuel Injector Install and Remove Tool, Oil Seal Remover Installer Tool Kit, Compatible for BMW N55 N63 S55 S63 B38 B48 Automotive Engine Timing Tool Kit

   See more
3. OEMTOOLS + Follow The fuel injector remover kit greatly reduces the amount of time it usually takes for this type of repair.

   See more
4. allsun + Follow Works great for leak detection in A/C systems and detect leaks for wind sound in autos; we are sure you'll find more useful things to do with this widely application device.

   See more

Customer Questions

There was a problem completing your request. Please try again later.

Don''t see the answer you''re looking for?

Post failed

You might also like

1. 6706 Fuel Injector Rail Assembly... 4 reviews EUR 88.24
2. OTC6778 Fuel Injector Puller Too... EUR 87.26
3. Fuel Injector Tool Removal and I... 15 reviews EUR 29.41
4. GM245 Fuel Injector Seals Tool F... 10 reviews EUR 34.22
5. DearChan Upgraded 7222 Injector ... EUR 27.45
6. 6706 Injector Rail Assembly Remo... 1 review EUR 88.24
7. Elf Bee 310-197 Ngine Fuel Injec... 133 reviews EUR 58.82

Top review from the United States

Johnny seamen1.0 out of 5 starsVerified Purchase Issues with threads and issue with holes for hooks Reviewed in the United States on September 10, 2021 Recommend not buying threads are junk and holes for hooks to small. Doesn''t come with case paid 130 for junk. Helpful Report

---

How customer reviews and ratings work

Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.Learn more how customers reviews work on Amazon

You are here